Anchor Pipe

Grade	C .	Si	Mn .	P ,S	Cu	Ni	Mo	Cr
10	0.07-0.14	0.17-0.37	0.35-0.65	Max.0.035	Max.0.25	Max.0.25	/	Max.0.15
20	0.17-0.24	0.17-0.37	0.35-0.65	Max.0.035	Max.0.025	Max.0.25	/	Max.0.25
35	0.32-0.40	0.17-0.37	0.50-0.80	Max.0.035	Max.0.25	Max.0.25		Max.0.25
45	0.42-0.50	0.17-0.37	0.50-0.80	Max.0.035	Max.0.25	Max.0.25		Max.0.25
16Mn	0.12-0.20	0.20-0.55	1.20-1.60	Max.0.035	Max.0.25	Max.0.25		Max.0.25
12Crmo	0.08-0.15	0.17-0.37	0.40-0.70	Max.0.035	Max.0.25	Max.0.30	0.40-0.55	0.40-0.70
15Crmo	0.12-0.18	0.17-0.37	0.40-0.70	Max.0.035	Max.0.25	Max.0.30	0.40-0.55	0.80-1.10
12Cr1Mov	0.08-0.15	0.17-0.37	0.40-0.70	Max.0.035	Max.0.25	Max.0.30	0.25-0.35	0.90-1.20

Mechanical Properties

Grade	Tensile strength(Mpa)	Yield strength(Mpa)	Elongation(%)
10	≥335	≥205	≥24
20	≥390	≥245	≥20
35	≥510	≥305	≥17
45	≥590	≥335	≥14
16Mn	≥490	≥325	≥21
12CrMo	≥410	≥265	≥24
15CrMo	≥440	≥295	≥22
12Cr1MoV	≥490	≥245	≥22

FAQ

1.Q:Are you a factory or trading company?

A:We are a factory. we also have cooperated factory doing other steel business.

2.Q:Where is your factory located? How can I visit there?

A:Our factory is located in Dezhou City, Shandong Provience, All our clients from home or abroad are warmly welcome to visit us!

3.Q:Can I get some samples?

A: Yes,we are honored to offer you samples.

4.Q:How does your factory do regarding quality control?

A:"Quality is priority. Our factory has gained ISO9001 authentication. We guarantee the goods out from our factory 100% qualified. And Each Process, we have very strict operation and arrange 2 techinians to inspect. After the products are finished, we will make the last test to pick up the unqualified products

5. Q: What is your MOQ?

as long as hold one container ,we can accpet the order.

6. What is your payment ?

if the quantity more than 100 tons , 100% L/C at sight can be accepted. Less than 100 tons ,30% t/t in advance ,70% balance agianst with B/L copy.

NAVIGATION

CONTACT US

MESSAGES